GMAC Forum
Building => Kits => Topic started by: ANDY MUCKLEY (Safety Officer) on 08/08/2012, 08:30:43 PM
-
Hi all have started the tiggy build but need a bit of help with the cabane plate and where you need to drill holes for the piano wire strengtheners.
Ok you drill a series of holes each end and stitch the U shaped strengtheners in place through the holes, but what it does'nt tell you is what to stitch it with as nothing is supplied with the kit. Cheers guys
-
Hi Andy, great to see someone using the forum, I wish more people would.
Any strong sewing thread will be fine. Maybe not the standard cotton that you can snap with your hands.
Something like this from Ebay perhaps?
http://www.ebay.co.uk/itm/2-X-LINEN-STRONG-HEAVY-DUTY-THREAD-BLACK-20-METRES-/120959831569?pt=UK_Thread_Floss_1&hash=item1c29c48e11#ht_966wt_952 (http://www.ebay.co.uk/itm/2-X-LINEN-STRONG-HEAVY-DUTY-THREAD-BLACK-20-METRES-/120959831569?pt=UK_Thread_Floss_1&hash=item1c29c48e11#ht_966wt_952)
Cheers
Chris
PS when are you out flying in the next week or so? I might try to get my Tiggie ready and bring it over. Seeing another is great to spur on some building..
-
And seeing two up together would spur Andy along even more ;) any chance of bringing Cirrus along too ;D
Cheers
Danny
-
Blimey - sounds like we are using the forum to arrange to go flying, whatever next?
To bring two would prob mean rigging one at the field to get them in, but it's do-able..
Thursday evening any good?
-
sounding very inviting thats for sure ;D
Cheers
Danny
-
HI guys shame i missed the fun thursday, hope you got it down ok with the strut problem Chriss. Thanks for the help and yes it is good to see the forum being used if only by a few at the moment
-
Hi Andy you missed a great evenings entertainment. Not least Chris and I starting two diesels to fly together. We did it though :-)
Cheers
Danny